- Large 4-digit LCD display
- Loop powered 4-20mA output
- High accuracy Microprocessor Based
- Utilizes Pt-1000 Ohm RTD for temperature sensing
- Optional RTD output
- Resolution 1/10 of a degree
- IP67 / NEMA 4X ( Waterproof )
- All stainless steel 316 construction
- Display in degree C or F
- Programming and calibration via DTG-PKit
Intempco DTG21 Series loop powered LCD Digital Temperature Gauges provide very accurate and reliable electronic temperature indication. Because of the robust IP67 housing all stainless design, they offer protection against moisture and dust penetration. The DTG21 can be used as a direct replacement for Bi-Metal, Liquid Bulb and Glass Thermometers. All models are factory calibrated for maximum accuracy. The DTG’s 4-digit 1/2” (12.7 mm) LCD display can be factory set in units of ºC or ºF. With resolution to a tenth of a degree, the DTG takes the guesswork out of reading dials and mercury columns. All DTG’s can be re-programmed and re-calibrated by use of Intempco’s DTG programming kit. NIST traceable calibration certificates are an available option.
DTG21’s can be ordered in many mounting configurations. The rigid probe is either of 1/4” or 3/8” diameter as standard but other diameters and materials are available. The wetted parts are all fabricated from stainless steel 316L. The RTD element used is Pt-1000 standard accuracy to DIN IEC 60751 Class A. DTG can be made available with an additional RTD output. This feature allows a single process connection to be used for indication of temperature and for remote indication, recording, or controlling. The electrical connector, a flexible cable or a Micro-DC male plug, are made available from the stainless housing for the optional RTD output. Each DTG has the part number, range and serial number marked on the thermometer housing.
- Replacement for Bi-Metal, Liquid Bulb and Glass Thermometers
- Pharmaceutical
- Food Preparation
- Utilities and Municipal
- Refineries
- Chemical and Petrochemical Plants
- Paper Mills
- Hydraulics
