- Loop-powered 4-20 mA and voltage output operation
- Built-in transmitter
- Calibration method with one wire
- Hermetically sealed, vibration resistant construction
- 1/2” NPT thread standard, others available
- Internal probe PFA clad or Stainless 316 bare
- Cable extension or M12 micro-connector
- Accuracy 1% of span for constant dielectric
The INTEMPCO series LTX62 are our most compact, vibration resistant capacitance level transmitters ever made available to the industry. They feature one-piece tubular welded design to a fitting and a concentric internal level detection probe. The LTX62 can be used in metallic and non-metallic tanks, as well as stationary or mobile equipment.
Built-in electronics are potted into the tube portion above the fitting. Standard output is 4-20mA but others are available. Calibration is easily performed via one wire. The microprocessor-based electronics convert frequency change, detected by the probe, into a linear, highly accurate 4-20 mA signal.
This compact design makes installation and setup a simple task. The advanced signal-conditioning circuitry greatly minimizes the adverse affects of poor dielectric and material coating on the probe.
Ideal for small tanks of all types, they can be used in virtually any liquid: conductive or non-conductive. One ideal application is measurement of fuel and oil levels of tanks in mobile equipment. Compact, rugged and hermetically sealed construction of LTX62 series sensors cannot be beat in performance.
- Diesel fuels, other fuels and oils in metallic or non-metallic tanks
- Water based liquids in metallic or non-metallic tanks
- Acids compatible with Stainless 316 and PFA Teflon in metallic or non-metallic tanks
- MEK and other solvents
- Chemical holding tanks, metallic or non-metallic
- Measurement of liquid levels in mobile equipment
- On-site calibration may be required
- Not recommended where material dielectric varies due to change of temperature or pressure
